|
|
Please select the glass or panel options for this pane.
Guidance will appear automatically on the right.
Please select any opener options for this pane.
Guidance will appear automatically on the right. Important!
Extenders do not add to the overall width/height of door frames.By choosing extenders the frame will be made slightly smaller, in order to keep the overall width/height including the extender the same as your measurements. Alternatively, if you wish to add an extender in addition to the overall width/height you measured, please choose the extender and leave a note at checkout. Please choose any extenders for the sides of your door frame:
Click to choose your colour, or click on the zoom icon to see it up close. Disclaimer: We cannot guarantee to match existing colours. For a colour match, please email us with your address for a free swatch. Flat White, RAL 9016 White grained for a superior look, RAL 9010 White grained for a superior look, RAL 9010 with flat White inside Classic-cream grained, RAL 9001 Classic-cream grained, RAL 9001 with flat White inside Chartwell-green grained Chartwell-green grained with flat White inside Agate-grey grained, RAL 7038 with flat White inside Irish-oak woodgrain Irish-oak woodgrain with flat White inside English-oak woodgrain Golden-oak woodgrain Golden-oak woodgrain with flat White inside Nut-tree woodgrain Nut-tree woodgrain with flat White inside Rosewood woodgrain Rosewood woodgrain with flat White inside Anthracite-grey grained, RAL 7016 Anthracite-grey grained, RAL 7016 with flat White inside Anthracite-grey matt-smooth, RAL 7016 Anthracite-grey matt-smooth, RAL 7016 with flat White inside Black-brown grained, RAL 8022 Black-brown grained, RAL 8022 with flat White inside Black-brown matt-smooth, RAL 8022 with flat White insideBespoke flat colour (+ 4 weeks)Bespoke flat colour with flat White inside (+ 4 weeks)Please enter at least 4 digits Coastal area: |
Internal magnetic blindsThese integrated Venetian blinds are permanently sealed inside the cavity of double-glazed units, keeping them totally out of harm's way in between the glass panes. Total privacy and light control for windows, doors, sliding doors, bi-folds and bay-windows. Excellent utilisation of partitioned office space. World’s number one integral blind system ScreenLine. How to add blinds Internal magnetic corded blindsThis blind works with a rotational cord winder attached at the top of the room-facing pane of the double-glazed unit. A continuous cord loop drives the internal magnet, which controls the raising, lowering and tilting of the slats. The cord is held lightly under tension by a cord tensioner.
Internal magnetic cordless blindsThis manually operated sliding Venetian blind works with a single magnetic slider placed on a narrow slide guide at the edge of the sealed unit. This slider allows the blind to be raised, lowered and tilted with ease, completely cord free.
Internal magnetic cordless dual-sided blindsThis blind offers slide-guides on both the left and right edges of the glass to create symmetry. The magnetic slider is positioned on a slide-guide at the edge of the sealed unit. This slider allows the slats to be raised, lowered and tilted with ease, completely cord free.
Colours
Textured colours
Textured foil in either grained or matt, guaranteed for 10 years for colour stability and discolouration.
Now you can customize your windows & doors with a vast range of sprayed colour coatings.
Internal Venetian Uni-Blinds with ingenious control for all the blind functions in one easy to use slider. The blind is encapsulated within the two glass panes of a double glazed unit, therefore no cords are present and virtually no cleaning is needed. The thermal efficiency is optimised thanks to a warm edge spacer bar as standard. How to operate Operated by a single cleverly designed magnetic slider, at the side of the glass. A narrow rail ensures the linear movement of the slider. The blind is raised and lowered by moving the slider up or down and is tilted by slightly lifting or lowering the same slider. Example video: https://www.youtube.com/watch?v=uz2lJ7hVKfc
Internal Venetian Uni-Blinds with ingenious control for all the blind functions in one easy to use slider. The blind is encapsulated within the two glass panes of a double glazed unit, therefore no cords are present and virtually no cleaning is needed. The thermal efficiency is optimised thanks to a warm edge spacer bar as standard. How to operate Operated by a single cleverly designed magnetic slider, at the side of the glass. A narrow rail ensures the linear movement of the slider. The blind is raised and lowered by moving the slider up or down and is tilted by slightly lifting or lowering the same slider. Example video: https://www.youtube.com/watch?v=gZBYfFzesXY
Internal Venetian Uni-Blinds controlled easily by use of a rotational cord winder. The blind is encapsulated within the two glass panes of a double glazed unit, therefore no cleaning of the slats is needed. The thermal efficiency is optimised thanks to a warm edge spacer bar as standard. How to operate A rotational cord winder at the top of the inside pane, along with a continuous cord loop and tensioner, controls the raising, lowering, and tilting of the blinds. Pulling the cord up or down lifts or lowers the blinds, and a slight movement of the same cord controls the tilt function. Example video: https://www.youtube.com/watch?v=JH7FCHgE-XkGuidanceHelpful guidance will appear here when you click on any options on this page.
Handle coloursExternal cillMost doors require an external cill to drain water away correctly. If you already have a stone or tiled cill as part of the building you may not require a cill. As standard our cills are 100mm wider than the door, projecting 50mm on each side. 95mm stub cill 150mm normal cill 180mm long cill Please note: The cill height is 30mm and if a cill is chosen then these 30mm will be included within the overall height of the door. Side window cillMost windows require an external cill to drain water away correctly. If you already have a stone or tiled cill as part of the building you may not require a cill. As standard our side window (flag) cills are 50mm wider than the window, projecting 50mm on one side only. 95mm stub cill 150mm normal cill 180mm long cill
Please note: The cill height is 30mm and if a cill is chosen then these 30mm will be included within the overall height of the side window. Fixing kitContains approximately 40 assorted packers of various thicknesses (1 to 4mm) ideal for aligning and fitting the frame and glass units (toe and heeling). Also approximately 12 concrete countersunk screws 7.5 x 120mm. These screws do not require wall plugs. How to video on Youtube. Glazing choicesThermal upgrade as standard, we use the same high quality Pilkington glass as on our windows. Advanced double glazing Argon filled with 1.22 glass u-rating.
Superior Triple glazing for an amazing 0.70 glass u-rating.
Acoustic glazing for significantly better noise insulation.
More information Acoustic glazingPilkington Optiphon™ high quality acoustic laminated glass offers excellent noise reduction without reducing light transmittance and impact performance. Ideal for significantly reducing noise from road, rail or air traffic, factories or nightclubs. Noise is reflected back towards the source and also absorbed within the glass. The glass unit is made of a 6.8mm acoustic laminated outer pane, a 18mm Superspacer void and a 4mm inner KS toughened pane. Being laminated it is also very secure and difficult to break into. The u-value is 1.2, the same as our superb A+ rated double glazing. Sound reduction Rw(C;Ctr) 41dB(-2; -6) Locks & cylindersWe supply these locking cylinders: Euro: Standard 6 pin cylinder lock. Thumbturn: allowing you to lock the door from the inside without a key. At the outside a key as usual. Ultion security: A superb 11 pin security cylinder, with a £1000 break-in guarantee from Ultion. More information Ultion thumbturn: A superb Ultion security cylinder but with a thumb-turn inside. All our doors come with 3 keys.
Open inside/outsideA door can open in, into your home or out, away from your home, as viewed from outside. Open out doors have the hinges on the outside, and open in on the inside. Open out: All open out doors are fitted with a 90 degree restrictor arm as standard to stop the door opening more than 90 degrees. Open in: We recommend that you add a 25mm frame extender to the hinge side to ensure sufficient space between the hinge and the interior plaster line.
The distance from the hinge to the edge of the outer frame is 16mm: Hinges Left/RightLever or padNormal (lever handle both sides): Pad (lever inside, pad outside): Both types require the handle to be lifted in order to engage the multi point locks. Once lifted the key can be turned to fully lock. Frame extendersA frame extender increases the thickness of a door frame at a specified side. Great for properties with deep plaster, render or tiles over tiles. Some fitters buy extenders as a precaution, for example where the door opening has not been built yet. Extenders can be modified to accomodate inconsistent side walls. Extenders simply clip or slide on the door profile as you can see on the picture.
Example of extender sliding on: ThresholdNormal threshold: Low threshold: Note: On inward opening doors, please make sure there is sufficient clearance between the bottom of the door and the floor inside. LetterboxKnocker/spyholeKnockers are available with or without a spyhole and are matched to your handle colour. The spyhole is built into the door knocker and allows you to view who is outside before opening. If you prefer a knocker at a different place or colour, please leave a note at checkout. Note: We do not offer knockers in silver just chrome. Opener menuThese are the opener options for the glass pane you just clicked on. For more guidance please click on the individual options. Glass menuThese are the glass options for the glass pane you just clicked on. For more guidance please click on the individual options. Glass typesWe supply clear glass and 19 designs of obscure privacy glass from Pilkington, including Satin. Panels: Insulated MDF reinforced UPVC panels instead of glass. Decorative panels: Reagan, Clinton and Pet-flap panels are only available at the bottom of doors or side-panes that have a midrail. ![]() Solid panel - level 6![]() Reagan panel - level 6![]() Clinton panel - level 6![]() Panel + pet flap - level 6![]() Clear - level 0![]() Arctic - level 4![]() Autumn - level 3![]() Chantilly - level 2![]() Charcoal-sticks - level 4![]() Contora - level 4![]() Cotswold - level 5![]() Digital - level 3![]() Everglade - level 5![]() Flemish - level 2![]() Florielle - level 4![]() Mayflower - level 4![]() Minster - level 2![]() Oak - level 4![]() Pelerine - level 5![]() Satin-opal - level 5![]() Stippolyte - level 4![]() Sycamore - level 2![]() Taffeta - level 3Glass decorationFor added decoration or for a traditional feel we have Georgian bars, Square lead or Diamond lead.
Our Georgian bars are 18mm thick and are placed between the glass panes for ease of cleaning. We do not offer external Astragal bars due to unreliability as they are just taped on.
We can instead supply a single horizontal or vertical extra bar. More information on the the glass menu pop-up.
Our Square lead is traditional lead which is 9mm thick and is placed on both sides of the external pane of glass.
Note: lead layouts are just a representation, the actual layout will be according to best practice. Note: For custom or special Georgian/lead layouts, or to match a window with an adjacent door or window, please leave specific instructions as a note at checkout. Georgian bars
Our Georgian bars are 18mm thick and are fitted between the glass panes for easier cleaning.
All Georgian bars are colour matched to your window colours to ensure the right look.
Instructions:
Please choose your own number of horizontal and vertical Georgian squares, or leave it on automatic where the actual layout will be set by us according to best practice. Small adjustments to align the bars between panes will be done by us. For custom/special layouts please leave a note at checkout. Special GeorgiansThese are some of the special layouts available: Offset three light Margin Georgian variant Astragal barsAstragal bars are fitted externally on both sides on the glass surface and inside to give the complete appearance of separate sections. Whereas Georgian bars are fitted only internally between the glass panes. Astragals imitate wooden traditional glazing bars of old that used to separate windows into smaller sections for an authentic period window look. Astragal and Georgian bars do not compromise the insulating abilities of the glazing unit as in both cases it remains 1 glazing unit. Our Astragal bars are 20mm thick, and are colour matched to your window colours to ensure the right look. Small adjustments to align the bars between panes will be done by us. Glass safetyWe supply 3 strengths of glass:
Standard: Normal glass, which is dangerous when broken as it breaks in large sharp pieces. Toughened: Specially treated to increase its strength and safety. Laminated: Our strongest glass, similar to a car's windscreen, has a laminated layer that keeps the glass together when broken, making it very difficult to break into. Outer side 6.8mm laminated, inner 4mm toughened glass. Building regulations apply to glass safety.
Opener choice
Left OpenerA left opener (as seen from the outside always) with the hinge on the left side and the handle on the right side.
Dummy Opener
Looks just like a real opener, but it has no handle and does not actually open. It's just decorative to match real operners.
Building regulations apply to ventilation.
Trickle ventNew Building Regulations We usually supply Glazpart Link-vents rated at 2500, 4000 and 5000mm² EA (Equivalent Area) to help with compliance with the new Part F regulations. Depending on stock levels we may supply an alternative vent. Vents are placed at the top of the sash to allow limited airflow without having to open the window.
They help to control outside air flow reducing condensation and mould. Trickle vents will closely (but not totally) match the door colour. Building regulations apply to ventilation.
Easy upgrade to PAS24After rigorous product testing on all our components we are proud to hold the PAS24 accreditation on UPVC single and French doors, for your extra peace of mind. PAS 24 (or equivalent standards) is required to meet Building Regs Part Q for new build properties and extensions. Please note, to comply with PAS24, laminated or acoustic laminated glass must be fitted to all easily accessible doors, door side panels and windows that are adjacent to a door. Please use the glazing button at the left. For more please see our leaflet. | |||||||
| ||||||||
|
SHOWROOM
Unit J, Tungsten Park, Showroom opening hours: Monday to Friday 9am – 4pm Saturday 9am – 12pm.
COLLECTIONS
Unit D3-D4 Collections hours: Monday to Friday 9am – 3:30pm
QUICK LINKS
© 2014-2025 Burbage Custom Windows Ltd, Company No. 02961904, registered in England & Wales. VAT No 620285663.
We use cookies for analytics and to make our marketing more relevant. See more in our Privacy Policy. |






